مقاله A Thermodynamic Model for Wax Deposition Phenomena pdf
مقاله A Thermodynamic Model for Wax Deposition Phenomena pdf دارای 12 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است
فایل ورد مقاله A Thermodynamic Model for Wax Deposition Phenomena pdf کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.
این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است
توجه : در صورت مشاهده بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله A Thermodynamic Model for Wax Deposition Phenomena pdf ،به هیچ وجه بهم ریختگی وجود ندارد
بخشی از متن مقاله A Thermodynamic Model for Wax Deposition Phenomena pdf :
سال انتشار: 1385
محل انتشار: یازدهمین کنگره ملی مهندسی شیمی ایران
تعداد صفحات: 12
نویسنده(ها):
seyed reza dalirsefat – Chemical Engineering Department, Iran University of Science and Technology, Tehran, Iran
Farzandeh Feyzi – Chemical Engineering Department, Iran University of Science and Technology, Tehran, Iran
چکیده:
Wax precipitation is a serious problem in the petroleum industry because it may result in the plugging of well bores, production facilities and transportation pipelines during oil/gas production. To avoid this problem it is necessary to predict the wax appearance temperature (WAT) accurately. Consequently, a reliable thermodynamic model for predicting WAT is crucial in the design of production and transportation facilities. In this work, a thermodynamic model, based on multi-solid phase theory, has been developed. In this model the vapor and liquid phase fugacities are
calculated using the Modified Peng Robinson (MPR) equation of state. The solid phase fugacities of pure components are evaluated indirectly from equation of state by the fugacity ratio. Fraction properties are estimated by use of PNA analysis and for evaluating enthalpy of fusion a correlation is developed. The major aim for performing this research was to develop a thermodynamic – computerized model for predicting WAT and the amount of precipitated wax in petroleum mixtures. The model has been applied to calculate wax appearance temperature and the amount of
precipitated wax for some North Sea and synthetic oils. The predicted results are in very good agreement with experimental data.
کلمات کلیدی:
